有限线性扩散区域内EC＇反应催化电流

有限线性扩散区域内ＥＣ＇反应催化电流吴志斌，董绍俊，吴浩青（同济大学化学系，上海，２０００９２）（中国科学院长春应用化学研究所）（复旦大学化学系）关键词有限线性扩散空间，ＥＣ＇反应，催化电流化学修饰电极等有关膜电极及薄层池的电极过程动力学问题均涉及到...     

含水杨醛缩苯胺双Schiff碱和吡啶配体的Zn(Ⅱ)配合物的电子结构和二阶非线性光学性质

以实验测定的晶体结构为基础, 用密度泛函理论的B3LYP方法, 在6-31G(d)基组水平上计算4个水杨醛缩苯胺类双Schiff碱和吡啶为配体的Zn(Ⅱ)配合物的电子结构, 并结合有限场(FF)方法得到二阶NLO系数. 结果表明, 在4个五配位配合物中, 双Schiff碱配体的共轭性减弱, 在Schiff碱配体引入叔丁基以及连接双Schiff碱的桥对配合物的结构影响很小. 同时4个配合物的配键性质、原子电荷分布、前线分子轨道能级等方面具有相似性. 但引入叔丁基改变了配合物前线分子轨道组成, Zn—O配位键的极性有所加强, 从而使配合物的极化率和二阶NLO系数增加, 而连接两个Schiff碱的桥对配合物二阶NLO性质影响不大.     

有限群极大子群的θ-子群偶

N.P.Mukherjee和 P.Bhattacharya在“On theta pairs for a maximal sub-group”(Proc.Amer.Math.Soc,Vl09N3(1990))一文中定义了有限群的极大子群的θ-子群偶概念,研究了极大子群的极大θ-子群偶对群结构的影响,得到了一系列结果.本文在进一步探究θ-子群偶性质的基础上,对该文中一系列主要结果作出了本质性的改进,并给出了可解性、幂零性的一些新刻划.     

随机模糊集与随机集

本文研究了三个方面的工作：一是定义了一种模糊集上的可测结构，从而定义了随机模糊集，这些定义都与论域Ｘ上的拓扑结构无关。将通常意义下的集合看成特殊模糊集得到的通常集合上的超可测结构与文（３）中的定义一致；二是给出了随机模糊集、随机集的一些等价条件；三是研究了随机模糊集、随机集的分布与其有限维落影族的关系。     

基于双尺度渐近分析的有限元算法

1．引言正如文山所说，由于复合材料和周期结构的材料系数ail（x）在局部区域内间断且跳跃性很大，加上区域内含有周期性洞穴或裂缝，且周期长度很小．一般而言，直接采用有限元方法进行数值模拟，其计算量大得惊人，甚至难以实现．文山针对这种特征，提出了一种可计算的双尺度渐近分析模式，本文在此基础上给出了相应的有限元算法，它包括：1．周期解在一个基本构造上的有限元计算；2．边界层的有限元计算．同时，给出了相应的误差分析．2．周期解的有限元计算首先考虑下列形式的边值问题；其中把，代E尸（on叫，iii（0关于E—（EI，ZZ…     

束变换环孔激光谐振腔的环束场传输差分计算

 通过使用新的坐标变量和光场的表达形式，推导了新坐标系下环束场传输的偏微分方程，给出了相应差分方程的截断误差和稳定性条件，使得环束场传输计算速度大幅提高；使用二阶精度的Crank-Nicolso差分方法对束变换环孔激光谐振腔的环束场传输进行了计算，并与W.D.Murphy和M.L.Bernabe所给M-B积分近似方法的计算结果进行了比较，证实了该方法无论计算速度和精度都优于M-B积分近似方法。     

脉冲泄流时土壤条件对冲击接地阻抗的影响

 为了探寻电流脉冲泄流时，设备的接地是否有效可靠，用FDTD法分析了脉冲泄流时均一土壤、分层土壤及局部改善土壤的电导率对冲击接地阻抗（TGR）的影响。结果表明：大地电导率对冲击接地阻抗的影响很大；对均一土壤，TGR随大地电导率的增大而减小，大地电导率越大，TGR对接地体的埋深越不敏感。对分层土壤，接地体要埋在大地电导率大的土壤层中，且不要靠近交界面；局部改善大地导电性能对降低TGR效果明显，TGR对改善区域的体积非常敏感，而当电导率大于一定值时，大地电导率的再增加，对TGR的影响不明显。     

Multi‐stage high order semi‐Lagrangian schemes for incompressible flows in Cartesian geometries

Efficient transport algorithms are essential to the numerical resolution of incompressible fluid‐flow problems. Semi‐Lagrangian methods are widely used in grid based methods to achieve this aim. The accuracy of the interpolation strategy then determines the properties of the scheme. We introduce a simple multi‐stage procedure, which can easily be used to increase the order of accuracy of a code based on multilinear interpolations. This approach is an extension of a corrective algorithm introduced by Dupont & Liu (2003, 2007). This multi‐stage procedure can be easily implemented in existing parallel codes using a domain decomposition strategy, as the communication pattern is identical to that of the multilinear scheme. We show how a combination of a forward and backward error correction can provide a third‐order accurate scheme, thus significantly reducing diffusive effects while retaining a non‐dispersive leading error term. Copyright © 2016 John Wiley & Sons, Ltd.     

The efect of the couple stress parameter and Prandtl number on the transient natural convection flow over a vertical cylinder

An analysis is performed to study transient free convective boundary layer flow of a couple stress fluid over a vertical cylinder, in the absence of body couples. The solution of the time-dependent non-linear and coupled governing equations is carried out with the aid of an unconditionally stable Crank–Nicolson type of numerical scheme. Numerical results for the steady-state velocity, temperature as well as the time histories of the skin-friction coefcient and Nusselt number are presented graphically and discussed. It is seen that for all flow variables as the couple stress control parameter, Co, is amplified, the time required for reaching the temporal maximum increases but the steady-state decreases.     

Experimental and numerical investigation of aramid fibre reinforced laminates subjected to low velocity impact

The low velocity impact performance of domestic aramid fibre reinforced laminates is investigated experimentally and numerically. Laminates with different thicknesses are impacted by drop-weight test machine under different impact energies. The time histories of impact force are recorded and ultrasonic C-scan technology is used to inspect the internal damage of the laminates. Numerical simulation is conducted using finite element method (FEM), taking into account both intralaminar and interlaminar damage. The intralaminar damage model is based on the continuum damage mechanics (CDM) approach, which consists of the strain-based Hashin failure criteria and the exponential damage evolution law, and considers the nonlinear shear behaviour of the material. The interlaminar damage is simulated by interface elements with cohesive zone model. The numerical results show good agreements with the experiments, thus verifying the validity of the presented numerical model.